ENGINE CRANKSHAFT & CASE
Showing 1–30 of 75 results
In StockFLYWHEEL SPACER 0.80 mm #369.02.107.1
Flywheel spacer 0.80mm for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.
£20.94 ex. VAT
In StockFLYWHEEL SPACER 0.9 mm #369.02.107.3
Flywheel Spacer (.90mm) for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.
£20.94 ex. VAT
In StockFLYWHEEL SPACER 0.95 mm #369.02.107.4
Flywheel Spacer (.95mm) 356 ABC (1950-65), and 912 (1965-69), except Super 90. Genuine Po
£22.65 ex. VAT
In StockFLYWHEEL SPACER 1.00 mm #369.02.107.5
Flywheel Spacer (1.00mm) for 356 ABC (1950-65), and 912 (1965-69), except Super 90. 369.0
£21.58 ex. VAT
In StockFLYWHEEL SPACER 1.05mm #369.02.107.6
Flywheel Spacer (1.05mm) for 356 ABC (1950-65), and 912 (1965-69), except Super 90.
£21.58 ex. VAT
In Stock356 / 912 Connecting Rod Nut #502.03.114
Connecting rod nut for 356, A, B, C and 912. Eight required.
£1.67 ex. VAT
In StockCRANK CASE GASKET 356A/B #539.01.124
Front gasket for 3-piece 1300, 1500, 1600 (up to engine #67000) and 1600 Super (up to engi
£1.37 ex. VAT
In Stock356 912 Generator Stand Gasket #539.01.125
Generator stand gasket for 356 ABC and 912.539.01.12553901125
£1.49 ex. VAT
In Stock356 912 CAM COVER CAP #539.01.132
Cam cover end plug for 356 (1950-65), 911 (1965-69) and 912 (1965-69).
£15.38 ex. VAT
In Stock356 912 CRANK SHAFT PULLEY #539.02.113
The crank pulley is made by the original manufacturer in Germany. A new pulley will solve
£304.23 ex. VAT
In Stock356 912 CYLINDER HEAD NUT SEAL #539.04.203
O-ring for cylinder head nut fits 356 (1950-65), and 912 (1965-69). Eight required.
£1.49 ex. VAT
In StockSHAFT FOR DISTRIBUTOR DRIVE #539.09.101
Distributor drive shaft for 356 ABC and 912 1950-69). 539.09.101 / 539.09.110
£291.00 ex. VAT
In StockSHIM FOR DISTRIBUTOR DRIVE #539.09.102
Distributor drive shim for all 356 (1950-65) and 912 (1965-69).
£6.43 ex. VAT
In StockSPRING FOR DISTRIBUTOR DRIVE #539.09.103
Distributor drive spring for 356 (1950-65) and 912 (1965-69). 539.09.10353909103
£2.90 ex. VAT
In Stock356 AB MAIN BEARING SET ST/ST #546.101.901.00
Standard alloy main bearing set for crankshaft for 356A, and 356B (1955-63).
£326.78 ex. VAT
In Stock356 AB MAIN BEARING SET 0.25 /ST #546.101.901.50
Alloy main bearing set for crankshaft fits 356A and 356B. Inside .25mm, outside standard.
£324.70 ex. VAT
In Stock356 AB MAIN BEARING SET 0.50/ST #546.101.901.55
Alloy main bearing set for crankshaft for 356A and 356B (1955-63). Inside .50mm, outside s
£322.58 ex. VAT
In StockDISTRIBUTOR DRIVE GEAR #546.102.110.01
Brass distributor drive gear. 356, 911, 914-6, 914-4, 912. 546.102.110.01
£98.90 ex. VAT
In Stock356 Crankcase Gasket #616.01.124.1
Gasket for the front of the engine case. It fits 356A, B (1955-63). Genuine Porsche.
£6.01 ex. VAT
In Stock356C SC 912 MAIN BEARING SET ST #616.100.138.00
Standard alloy main bearing set for crankshaft for 356C, SC and 912. 1964-69. 616.100.138
£296.70 ex. VAT
In StockMAIN BEARING SET 0.25/ST 356C/SC #616.100.138.50
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-69). Inside .25mm, out
£310.63 ex. VAT
In StockMain Bearing Set .25mm 356C 912 #616.100.138.60
Alloy main bearing set for crankshaft for 356C and 912. Inside standard, outside .25mm.
£278.57 ex. VAT
In StockDOWEL PIN FOR BEARING #1 356C/SC #616.101.172.00
Dowel pin for bearing #1356C, SC. GENUINE PORSCHE
£9.54 ex. VAT
In Stock356 912 BEVELED CASE WASHER #616.101.191.00
Beveled case washer for all 356 (1950-1965) and 912 (1965-69). Seven required.
£5.00 ex. VAT
In StockCRANK CASE GASKET 356C / 912 #616.101.391.00
Gasket for the front of the engine case. It fits 356C (1964-1965) and 912 (1965-1969) Genu
£1.60 ex. VAT
In Stock356 912 CASE GASKET SET #616.101.901.00
Engine Case gasket set for 356 ABC and 912 (1950-69).
£52.92 ex. VAT
In Stock356 CRANKSHAFT SC / 912 #616.102.015.01
Crankshaft. Fits 356 SC (1964-65) and 912 (1965-69). 616.102.015.0161610201501
£1,494.72 ex. VAT
In Stock356 912 PULLEY SEALING WASHER #616.102.163.01
Crank Pulley, Sealing Washer, 356 & 912 (1950-69).
£4.87 ex. VAT
In StockStandard Rod Bearing Set 356 912 #616.103.142.02A
Rod bearing set, standard fits 356B, C, SC, 912. Note: Wide tab early bearings are no lon
£59.76 ex. VAT
In StockROD BEARING SET 1ST UNDER 0.25mm #616.103.142.52
Rod bearing set 1st under 0.25 for 356A,B,C, and 912 (1955-69). The bearings for later mo
£55.88 ex. VATShowing 1–30 of 75 results