ENGINE CRANKSHAFT & CASE
Showing 1–30 of 75 results
In StockFLYWHEEL SPACER 0.80 mm #369.02.107.1
Flywheel spacer 0.80mm for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.
£20.94 ex. VAT
In StockFLYWHEEL SPACER 0.9 mm #369.02.107.3
Flywheel Spacer (.90mm) for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.
£20.94 ex. VAT
In StockFLYWHEEL SPACER 0.95 mm #369.02.107.4
Flywheel Spacer (.95mm) 356 ABC (1950-65), and 912 (1965-69), except Super 90. Genuine Po
£19.52 ex. VAT
In StockFLYWHEEL SPACER 1.00 mm #369.02.107.5
Flywheel Spacer (1.00mm) for 356 ABC (1950-65), and 912 (1965-69), except Super 90.
£20.68 ex. VAT
In Stock356 / 912 Connecting Rod Nut #502.03.114
Connecting rod nut for 356, A, B, C and 912. Eight required.
£1.67 ex. VAT
In StockCRANK CASE GASKET 356A/B #539.01.124
Front gasket for 3-piece 1300, 1500, 1600 (up to engine #67000) and 1600 Super (up to engi
£1.37 ex. VAT
In Stock356 912 Generator Stand Gasket #539.01.125
Generator stand gasket for 356 ABC and 912.
£1.55 ex. VAT
In Stock356 912 CAM COVER CAP #539.01.132
Cam cover end plug for 356 (1950-65), 911 (1965-69) and 912 (1965-69).
£12.44 ex. VAT
In Stock356 912 CRANK SHAFT PULLEY #539.02.113
The crank pulley is made by the original manufacturer in Germany. A new pulley will solve
£290.92 ex. VAT
In Stock356 912 CYLINDER HEAD NUT SEAL #539.04.203
O-ring for cylinder head nut fits 356 (1950-65), and 912 (1965-69). Eight required.
£1.35 ex. VAT
In StockSPRING FOR DISTRIBUTOR DRIVE #539.09.103
Distributor drive spring for 356 (1950-65) and 912 (1965-69).
£2.70 ex. VAT
In Stock356 AB MAIN BEARING SET ST/ST #546.101.901.00
Standard alloy main bearing set for crankshaft for 356A, and 356B (1955-63).
£326.78 ex. VAT
In Stock356 AB MAIN BEARING SET 0.25 /ST #546.101.901.50
Alloy main bearing set for crankshaft fits 356A and 356B. Inside .25mm, outside standard.
£317.17 ex. VAT
In Stock356 Crankcase Gasket #616.01.124.1
Gasket for the front of the engine case. It fits 356A, B (1955-63). Genuine Porsche.
£6.01 ex. VAT
In Stock356C SC 912 MAIN BEARING SET ST #616.100.138.00
Standard alloy main bearing set for crankshaft for 356C, SC and 912. 1964-69. 616.100.138
£301.21 ex. VAT
In StockMAIN BEARING SET 0.25/ST 356C/SC #616.100.138.50
Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-69). Inside .25mm, out
£310.63 ex. VAT
In StockDOWEL PIN FOR BEARING #1 356C/SC #616.101.172.00
Dowel pin for bearing #1356C, SC. GENUINE PORSCHE
£7.85 ex. VAT
In Stock356 912 BEVELED CASE WASHER #616.101.191.00
Beveled case washer for all 356 (1950-1965) and 912 (1965-69). Seven required.
£4.65 ex. VAT
In StockCRANK CASE GASKET 356C / 912 #616.101.391.00
Gasket for the front of the engine case. It fits 356C (1964-1965) and 912 (1965-1969) Genu
£1.60 ex. VAT
In Stock356 912 CASE GASKET SET #616.101.901.00
Engine Case gasket set for 356 ABC and 912 (1950-69).
£47.06 ex. VAT
In Stock356 CRANKSHAFT SC / 912 #616.102.015.01
Crankshaft. Fits 356 SC (1964-65) and 912 (1965-69).
£1,194.96 ex. VAT
In Stock356 912 PULLEY SEALING WASHER #616.102.163.01
Crank Pulley, Sealing Washer, 356 & 912 (1950-69).
£4.39 ex. VAT
In StockStandard Rod Bearing Set 356 912 #616.103.142.02A
Rod bearing set, standard fits 356B, C, SC, 912. Note: Wide tab early bearings are no lon
£43.11 ex. VAT
In StockROD BEARING SET 1ST UNDER 0.25mm #616.103.142.52
Rod bearing set 1st under 0.25 for 356A,B,C, and 912 (1955-69). The bearings for later mo
£55.88 ex. VAT
In StockROD BEARING SET 2ND UNDER 0.50mm #616.103.142.62
Rod bearing set, .50mm, for 356A, B, C (1955-65), and 912 (1965-69). Note: Wide tab early
£56.03 ex. VAT
In Stock356 912 DOWEL PIN FOR FLYWHEEL #900.109.004.00
Flywheel dowel pin for 356 ABC (1950-65) and 912 (1965-69). Eight required. 8 REQ
£2.30 ex. VAT
In Stock356 / 912 CON ROD BUSH #901.103.131.01
Solid wrist pin bushing for 356 (1956-65) (four required), 911 (1965-83) (six required), 9
£10.00 ex. VAT
In Stock356 / 911 / 912 / 914 CASE NUT #999.070.004.02
Case nut for all 356 (1950-65), 911 (1965-77), 912 (1965-69). Thirteen required.
£5.92 ex. VAT
In Stock356 / 912 OIL SEAL PULLEY END #999.113.012.50
Crankshaft seal for rear pulley on 356 ABC and 912.
£5.89 ex. VAT
In Stock356 / 912 OIL SEAL FLYWHEEL END #999.113.029.50
Crankshaft seal for front flywheel on 356 ABC and 912
£4.89 ex. VATShowing 1–30 of 75 results