ENGINE CRANKSHAFT & CASE

Showing 1–30 of 75 results

FLYWHEEL SPACER 0.80 mmIn Stock

FLYWHEEL SPACER 0.80 mm #369.02.107.1

Flywheel spacer 0.80mm for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.

£19.53 ex. VAT
FLYWHEEL SPACER 0.9 mmIn Stock

FLYWHEEL SPACER 0.9 mm #369.02.107.3

Flywheel Spacer (.90mm) for 356 ABC (1950-65), and 912 (1965-1969), except Super 90.

£20.68 ex. VAT
FLYWHEEL SPACER 0.95 mmIn Stock

FLYWHEEL SPACER 0.95 mm #369.02.107.4

Flywheel Spacer (.95mm) 356 ABC (1950-65), and 912 (1965-69), except Super 90. Genuine Po

£19.52 ex. VAT
FLYWHEEL SPACER 1.00 mmIn Stock

FLYWHEEL SPACER 1.00 mm #369.02.107.5

Flywheel Spacer (1.00mm) for 356 ABC (1950-65), and 912 (1965-69), except Super 90.

£20.68 ex. VAT
CRANK CASE GASKET 356A/BIn Stock

CRANK CASE GASKET 356A/B #539.01.124

Front gasket for 3-piece 1300, 1500, 1600 (up to engine #67000) and 1600 Super (up to engi

£1.37 ex. VAT
Generator Stand GasketIn Stock

356 912 Generator Stand Gasket #539.01.125

Generator stand gasket for 356 ABC and 912.

£1.27 ex. VAT
Sale! CAM COVER CAPIn Stock

356 912 CAM COVER CAP #539.01.132

Cam cover end plug for 356 (1950-65), 911 (1965-69) and 912 (1965-69).

£11.71 ex. VAT
Sale! CRANK SHAFT PULLEY 356/912In Stock

356 912 CRANK SHAFT PULLEY #539.02.113

The crank pulley is made by the original manufacturer in Germany. A new pulley will solve

£238.50 ex. VAT
CYLINDER HEAD NUT SEAL 356 912In Stock

356 912 CYLINDER HEAD NUT SEAL #539.04.203

O-ring for cylinder head nut fits 356 (1950-65), and 912 (1965-69). Eight required.

£1.27 ex. VAT
Sale! SHIM FOR DISTRIBUTOR DRIVEIn Stock

SHIM FOR DISTRIBUTOR DRIVE #539.09.102

Distributor drive shim for all 356 (1950-65) and 912 (1965-69).

£5.47 ex. VAT
SPRING FOR DISTRIBUTOR DRIVEIn Stock

SPRING FOR DISTRIBUTOR DRIVE #539.09.103

Distributor drive spring for 356 (1950-65) and 912 (1965-69).

£1.86 ex. VAT
Sale! MAIN BEARING SET 356/A/B ST/STIn Stock

356 AB MAIN BEARING SET ST/ST #546.101.901.00

Standard alloy main bearing set for crankshaft for 356A, and 356B (1955-63).

£270.87 ex. VAT
Crankcase GasketIn Stock

356 Crankcase Gasket #616.01.124.1

Gasket for the front of the engine case. It fits 356A, B (1955-63). Genuine Porsche.

£6.01 ex. VAT
Sale! MAIN BEARING SET 0.25/ST 356C/SCIn Stock

MAIN BEARING SET 0.25/ST 356C/SC #616.100.138.50

Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-69). Inside .25mm, out

£292.36 ex. VAT
DOWEL PIN FOR BEARING #1 356C/SCIn Stock

DOWEL PIN FOR BEARING #1 356C/SC #616.101.172.00

Dowel pin for bearing #1356C, SC.

£9.15 ex. VAT
BEVELED CASE WASHER 356 912In Stock

356 912 BEVELED CASE WASHER #616.101.191.00

Beveled case washer for all 356 (1950-1965) and 912 (1965-69). Seven required.

£4.65 ex. VAT
CRANK CASE GASKET 356C / 912In Stock

CRANK CASE GASKET 356C / 912 #616.101.391.00

Gasket for the front of the engine case. It fits 356C (1964-1965) and 912 (1965-1969) Genu

£1.50 ex. VAT
Sale! CASE GASKET SET 356 912In Stock

356 912 CASE GASKET SET #616.101.901.00

Engine Case gasket set for 356 ABC and 912 (1950-69).

£43.03 ex. VAT
Sale! PULLEY SEALING WASHER 356 912In Stock

356 912 PULLEY SEALING WASHER #616.102.163.01

Crank Pulley, Sealing Washer, 356 & 912 (1950-69).

£7.50 ex. VAT
Sale! Standard Rod Bearing Set 356 912In Stock

Standard Rod Bearing Set 356 912 #616.103.142.02A

Rod bearing set, standard fits 356B, C, SC, 912. Note: Wide tab early bearings are no lon

£52.61 ex. VAT
Sale! ROD BEARING SET 2ND UNDER 0.50mmIn Stock

ROD BEARING SET 2ND UNDER 0.50mm #616.103.142.62

Rod bearing set, .50mm, for 356A, B, C (1955-65), and 912 (1965-69). Note: Wide tab early

£52.74 ex. VAT
DOWEL PIN FOR FLYWHEEL 356/912In Stock

356 912 DOWEL PIN FOR FLYWHEEL #900.109.004.00

Flywheel dowel pin for 356 ABC (1950-65) and 912 (1965-69). Eight required. 8 REQ

£2.21 ex. VAT
Sale! CON ROD BUSH 356 / 912In Stock

356 / 912 CON ROD BUSH #901.103.131.01

Solid wrist pin bushing for 356 (1956-65) (four required), 911 (1965-83) (six required), 9

£9.41 ex. VAT
Sale! CASE NUT 356 / 911 / 912 / 914In Stock

356 / 911 / 912 / 914 CASE NUT #999.070.004.02

Case nut for all 356 (1950-65), 911 (1965-77), 912 (1965-69). Thirteen required.

£5.58 ex. VAT
Sale! 356 / 912 OIL SEAL PULLEY ENDIn Stock

356 / 912 OIL SEAL PULLEY END #999.113.012.50

Crankshaft seal for rear pulley on 356 ABC and 912.

£5.24 ex. VAT
Sale! OIL SEAL FLYWHEEL END  356 - 912In Stock

356 / 912 OIL SEAL FLYWHEEL END #999.113.029.50

Crankshaft seal for front flywheel on 356 ABC and 912

£4.10 ex. VAT
CASE STUD O-RING 356/912In Stock

912 / 911 CASE STUD O-RING #999.701.006.40

356 / 912 x7 required. 911 (1965-89, 1995-98), 930 (1976-89), 911 Turbo (1990-94, 1996-9

£2.08 ex. VAT
Sale! SPEEDY SLEEVE FOR PULLEY 356 912In Stock

356 912 SPEEDY SLEEVE FOR PULLEY #SIC.102.991.89

Speedi Sleeve for Crank Pulley Sealing Surface. Solves Sealing Issues from Wear Grooves on

£40.32 ex. VAT
Sale! SPEEDY SLEEVEIn Stock

356 912 FLYWHEEL SPEEDY SLEEVE #SIC.102.992.41

Speedi Sleeve (flywheel hub end). 356 & 912

£37.56 ex. VAT
Sale! MAIN BEARING SET 0.50/0.25 C 912In Stock

MAIN BEARING SET 0.50/0.25 C 912 #616.100.138.75

Alloy main bearing set for crankshaft for 356C (1964) and 912 (1965-69). Inside .50mm, out

£293.12 ex. VAT

Showing 1–30 of 75 results